Construction And Principle Of Operation Of A Glock 26 Holster With A Four-Stroke Sliding-Rotary Lock.
The most important element of the glock 26 holster is the barrel which acts as a kind of guide for the fired projectile. It is exposed to enormous pressure of powder gases and the frictional forces of a moving projectile. That is why they are made of the highest quality alloy steels. The barrel is exposed to pressures up to 3800 KG / cm. The threaded barrel is adapted to shooting at long distances, the threaded barrel of the barrel gives the projectiles rotation, and thus provides them with axial stabilization click here to known about glock 26 holster
The initial unthreaded part of the barrel into which the cartridge is inserted is the chamber. A cartridge chamber is a recess in the shape of a cartridge adapted to it. The cartridge chamber must be made with the greatest care. The precisely made cartridge chamber.
After firing a shot or letting the firing pin dry, the weapon is ready for re-tensioning the nailing mechanism.
The parts of the slide, the cartridge chamber and the trigger-shock mechanisms, just like the barrel, are made of the highest quality steel. The breech chamber is a kind of a weapon skeleton. In most cases, it connects to the barrel with a thread, it also integrates the remaining elements, the stock with the connector in which the magazine is mounted, or the ammunition feeder with a spring. In the case of the classic repeater, as described in this study, a trigger mechanism is also embedded in the castle chamber. Another part without which the weapon will not work is the lock. It moves in the chamber on profiled guides. The lock has special projections called bolts -glock 26 holster.
In the case of the described repeater, after lowering the bolt knob to the lower position, the cartridge is blocked in the cartridge chamber, which protects against the force of gases generated after the shot, which presses against the bolt’s front. In addition to performing the function of a bolt, the lock includes a bolt mechanism, strike mechanism and a mechanism for pulling the shells from the cartridge chamber. After lifting the lock knob up from the position, the unlocking takes place. Moving the slide back along the guides of the breech chamber causes its retraction along with the scale held by the claw of the lift. The casing is thrown outside the moment after it leaves the chamber, and the chamber is empty. After the slide is withdrawn to the rear position, the slide must be moved forward again, and thereby takes the cartridge from the feeder and pushes it with its head portion into the cartridge chamber.
The forward movement of the bolt also caused the bolt strike mechanism to mesh with the trigger latch glock 26 holster. The lock lever in the lower position indicates that it is locked.
